Exploring Your Options for the Right Gym Mirrors

One of the most important pieces of furniture to get for setting up a gym or a dance studio is a floor to ceiling mirror that will help your clients see their form while they are doing those crunches and/or dance moves. It is thus, imperative that you choose the right gym mirrors for your facility.

There are a variety of gym mirrors available in the market today. These come in a variety of styles, size, finish, and, of course, the materials that are used in their fabrication. More often than not, many novice gym owners make the mistake of getting something not really appropriate for their health and fitness facility. It is for this reason that you need to explore the different options when choosing the correct gym mirror.

Things to Consider When Buying a Gym Mirror

Like any other endeavor, it is crucial to carefully examine all the different parameters that can have a bearing on your choice. Choosing a gym mirror is not unlike picking a furniture for your home. You have to have a clear idea of what you want. To help you in making the correct decision, here are some things that you need to consider when buying your mirror for your dance studio or gym.

·         Size of your wall 

One of the most important considerations that you will have to factor in is the size of the wall in your facility. It also depends on how you want the mirrors to be placed. If you require an end to end or corner to corner mirror, then you will have to measure the entire length of the wall. If not, say you only want to put mirrors in certain sections of the wall or even leave a space in the corners, then you will have to measure this, too. 

The standard width of a gym mirror is 1,220 millimeters or 4 feet. So, you will have to measure the length of your wall and then divide that by either 4 feet or by 1,220 millimeters. If the quotient is not a whole number, then you will need to round it off to the nearest whole number. 

For instance, if the length or width of your wall is about 20 feet long or wide, then that means you will need to divide 20 feet by 4 feet to give you 5 sheets of gym mirror. Now, if in case you want to put space in both corners of the wall, say about 1 foot each, then the total length is 18 feet.  

As for the height of the gym mirror, the standard is 6 feet although it is not unusual to have 8 feet. You can actually decide on the height of the mirror and have it cut according to your needs. A lot of people prefer to have a floor to ceiling type of mirror while some would like it to start a bit higher off the floor especially if they have heavy weights or any other gym equipment that may break the glass by accident.  

·         Glass or acrylic 

There are two fundamental materials used in the construction of gym mirrors. If it is reflection fidelity that you are after, it is best to use glass. However, caution must be observed as this is not really shatter-proof. If you require a gym mirror that can be designed or styled in a particular form, then your best bet will be an acrylic mirror or plastic mirror. Do take note that these are relatively thinner in thickness, usually about 3 millimeters, and as such are very prone to flexing. Because of this flexing, it might not give you the kind of reflection that you want from your mirror. 

·         Thickness of the mirror 

As a general rule, the thicker the mirror plate, the better and sturdier it is. The problem with thin mirrors like those made of acrylic is that they are prone to flexing. You should always target 4 millimeters or even 6 millimeters. For home use, a 4 mm mirror should suffice. However, if this is for a dance studio or a gym where other people will also be present, then you should always go for the 6 millimeter. 

·         Polished edges 

It’s a lot better to install a mirror that has been polished at its edges to make it as straight and smooth as possible. It is also a lot safer to install than a plate that has been roughly machine cut. 

·         Need for safety backing 

If you are going to install your gym mirror using J channels or mirror screws fitted to holes, then you need safety backing to help contain any shattered glass in case of an accident. If you are going to apply adhesive for mounting your gym mirror, you don’t need a safety backing anymore. 

·         Method of installation 

There are 3 ways you can install a gym mirror: adhesives, J channels, and holes with mirror screws. Adhesive mounts are practical and very easy to install. However, they tend to be more difficult to remove in case you want to replace them. J channels are also easy to fit and provide a neat finish to your mirror. Unfortunately, these only work on 6 mm thick mirrors. On the other hand, holes with mirror screws allow versatility and use on 4 mm thick plates. Sadly, these are quite expensive and a bit difficult to install.

Now that you have all the information you need you’re now more confident about your choice of the perfect gym mirror.